Chimney Cap Replacement Spokane WA: Caps, Chase Covers and Crowns
A rusted-through cap is the cheapest chimney problem you will ever have, and the most expensive one to ignore. Everything water gets into up there freezes, and in Spokane it freezes a lot.
- Price before any work starts
- Written report of what we found
- Spokane and Spokane Valley
- Send photos, get a real number
Most people only look at the top of their chimney after something has already gone wrong: a stain spreading on the ceiling, a bird in the flue, or rust streaks down the brick. The part that failed is almost always the cap or the crown, and the two get confused constantly.
Cap, chase cover, crown: three things people call the same thing
Worth two minutes, because the price difference between them is large.
- The cap is the metal hood sitting over the flue opening. It sheds rain, keeps animals out, and its mesh stops embers landing on the roof.
- The chase cover is the flat metal lid on a factory-built chimney, the boxed-in kind clad in siding. It covers the whole top of the chase, not just the flue.
- The crown is the sloped concrete slab on top of a masonry chimney. It is structural, and a cracked one is the most common hidden cause of a leak.
How you know the cap has gone
- Rust streaks running down the brickwork, usually the first thing anyone notices
- Water in the firebox after rain, or a damp smell when the fire is out
- Birds, squirrels or nesting material in the flue
- Smoke backing into the room on a windy day
- Debris in the firebox that did not come from your fire
Why Spokane is hard on caps
It is the freeze-thaw cycle rather than the cold itself. Water finds a pinhole in a rusted cap or a hairline crack in a crown, sits there, freezes overnight, and expands. That expansion widens the gap, which lets in more water the next time. A crack that would stay a crack in a milder climate opens up over a few Spokane winters.
This is also why a cheap galvanised cap is a false economy here. It will rust, and the rust is what you will be looking at on the front of your house.
What a cap or crown costs in Spokane
These are typical ranges, not a quote. Your chimney gets priced on what is actually up there.
- Single-flue stainless cap, supplied and fitted: $200 to $650
- Custom or multi-flue cap, made to your crown: $425 to $850
- Chase cover replacement, factory-built chimney: $300 to $700
- Crown repair or rebuild: $1,000 to $3,000
- Labour only, if you have already bought the cap: $125 to $350
What moves a price up: roof pitch and height, a multi-flue top that needs measuring rather than an off-the-shelf size, and a crown that turns out to need work once someone is up there looking at it.
What to expect on the day
A straightforward cap swap is an hour or two and you do not need to be home, though somebody should know a ladder is going up. A crown rebuild is a different job: it is wet work, it needs to cure, and it should not be done in freezing weather. If you are reading this in January and the crown is the problem, expect to be told to wait for a dry spell.
Questions people ask
How much does a chimney cap cost in Spokane?
A single-flue stainless cap supplied and fitted typically runs $200 to $650. A custom or multi-flue cap is more like $425 to $850 because it is made to the dimensions of your crown. If you have already bought the cap and only want it fitted, labour alone is usually $125 to $350.
Do I actually need a chimney cap?
A flue will work without one, which is why plenty of older Spokane chimneys never had a cap. What you get for the money is keeping rain, snow and animals out of the flue, and keeping embers off the roof. The rain is the part that matters here, because water sitting in masonry through a Spokane winter is what cracks it.
My chimney is leaking. Is it the cap or the crown?
Those are different parts and the fix costs very different money, so it is worth knowing which you are looking at. The cap is the metal hood over the flue opening. The crown is the sloped concrete slab that covers the top of the brickwork. Water coming in with a sound cap usually means the crown has cracked, or the flashing where the chimney meets the roof has failed.
Can I fit a chimney cap myself?
Some people do, and a single-flue cap on a low roof is a straightforward job. Two cautions. Spokane roofs are steep and icy for a good part of the year, and a cap that does not seat properly is worse than no cap, because it traps water instead of shedding it.
How long does a stainless cap last?
Stainless typically outlasts the roof it sits on. Galvanised is the one to watch: it is cheaper up front and tends to rust through, and the rust streaks running down the brickwork are usually the first sign anyone notices.
Other chimney work in Spokane
Chimney repair
Crowns, liners and the rest of the water damage that follows a failed cap.
Chimney inspection
If you are not sure what failed up there, this is the cheaper first step.
Chimney sweep
Worth combining with a cap fit, since the same visit covers both.
Spokane Valley
Same work, Valley side.
Get a price before anything starts
Call (509) 267-6216, or email a photo of the top of your chimney to spokanechimneyworks@gmail.com. A photo from the ground is usually enough to tell a cap problem from a crown problem, and that is the difference between a few hundred dollars and a few thousand.
Get a free quote
Tell us what you need and we’ll get you a quote from a local pro. Free, and no obligation.